Turner Mine Shale Member

From ILSTRAT
Revision as of 18:23, 19 February 2021 by IlLex (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Lithostratigraphy: Carbondale Formation >>Turner Mine Shale Member
Chronostratigraphy: Paleozoic Erathem >>Pennsylvanian Subsystem >>Desmoinesian Series
Allostratigraphy: Absaroka Sequence

Primary source

Nelson, W.J., 2020, Pennsylvanian Subsystem in Illinois: Illinois State Geological Survey Bulletin (in press).
Edited and figures drafted by Jennifer M. Obrad.

Contributing author(s)

W.J. Nelson

Name

Original description

Worthen (1870, p. 93, 100) first noted the presence of black shale overlying coal No. 5 (Springfield) in Fulton County, Illinois. Innumerable subsequent authors discussed the shale, but none proposed a formal name until Nelson (1983a) offered the present name.

Derivation

The name refers to the Turner No. 1 Mine, where the core that serves as the type section was drilled. The mine buildings and portal are shown, but not labeled, on the Crab Orchard 7.5' topographic map.

Other names

No consistent term, formal or otherwise, was applied to this unit prior to 1983. The equivalent black shale unit in the Midcontinent was part of the Little Osage Formation until Gentile and Thompson (2004) named it the Binkley Shale Member.

History/background

None.

Type section

Figure 4-56. Graphic log based on core from an Abandoned Mines Reclamation Council borehole in sec. 21, T 16 N, R 4 W, Sangamon County, Illinois, the principal reference section for the Springfield Coal Member. © University of Illinois Board of Trustees.

Type location

Soil Conservation Service borehole B-41 was drilled in sec. 27, T 9 S, R 4 E, Williamson County, Illinois. The Turner Mine Shale is 4.0 ft (1.2 m) thick and occurs between the depths of 52.7 and 56.7 ft (16.1 to 17.3 m; Figure 4-56).

Type author(s)

Nelson (1983a).

Type status

Core from B-41 is archived at the ISGS Geological Samples Library under call number C-12753. Logs from this and other cores in the same series are on file at the ISGS Geological Records Unit and can be viewed on the ISGS website.

Reference section

None.

Stratigraphic relationships

Across most of the Illinois Basin, the Turner Mine Shale directly overlies the Springfield Coal and underlies the St. David Limestone. Near the Galatia channel, the Dykersburg Shale Member separates coal from black shale.

Extent and thickness

The Turner Mine is more or less coextensive with the Springfield Coal throughout the Illinois Basin, and it extends beyond the limits of the coal in northern Illinois (Willman and Payne 1942). The black shale is absent across much of the Western Shelf where the coal is thin or missing, and it generally pinches out where the Dykersburg Shale is thicker than 30 to 40 ft (9 to 12 m). The thickness of the Turner Mine averages about 3 ft (1 m), ranging from less than 1 ft to about 5 ft (0.3 to 1.5 m). The greatest known thickness is 7.9 ft (2.4 m) in a core in Williamson County. Rarely is the Turner Mine absent where both Springfield Coal and St. David Limestone are present.

Lithology

Although hundreds of maps and reports note this unit in cursory fashion, only a few (notably Willman and Payne 1942; Wanless 1957) provide extended descriptions. No known publications have focused on this unit. Thousands of unpublished field notes and core descriptions provide further information. Except near its depositional limits, this shale is black, hard, and highly fissile or “sheety” and has a lower density than Pennsylvanian gray shales. The shale often weathers to a light bluish or silvery gray. Spheroidal and ovoid concretions of dark gray microgranular limestone that range up to more than 2 ft (60 cm) across are common. The shale lamination bends around these concretions. Large, planar, widely spaced joints outline rectangular or rhombohedral blocks. Laminae and small lenses of phosphatic material are numerous. Pyrite laminae and lenses also are numerous, especially at the base, where a lag deposit of pyritized shell fragments may occur. In many exposures, the upper part of the member is mottled with gray, green, and olive and is soft and flaky rather than sheety. Near its depositional limits, the entire unit may become mottled and soft.

Core(s)

Photograph(s)

Contacts

Both contacts typically are sharp; the lower one is widely erosive on the Dykersburg Member.

Well log characteristics

Typical for black phosphatic shale, gamma-ray readings are extremely high, whereas neutron and density values are low (but not as low as coal). The Turner Mine does not stand out on most electric logs.

Fossils

Most common are the pectenoid pelecypods Dunbarella and Aviculopecten, the inarticulate brachiopods Lingula and Orbiculoidea, conodonts, and fish remains. Concretions yield a more varied assemblage that includes several genera of articulate brachiopods, bivalves, gastropods, and cephalopods (Savage 1921; Willman and Payne 1942; Wanless 1957, 1958).

Age and correlation

The ammonoids reported by Wanless (1958) indicate late Desmoinesian age without allowing precise interbasin correlation, according to Boardman et al. (1994). Work et al. (2009) correlated the Washingtonville Shale of the northern Appalachian Basin with the Little Osage Shale (Kansas and Missouri) and Wetumka Shale (Oklahoma) on the basis of ammonoids. Using conodonts, Heckel (2013, p. 18) confirmed that the Little Osage correlates with the Turner Mine Shale. Physical stratigraphy and fossil spores from the Springfield Coal (Peppers 1996) bolster these correlations.

Environments of deposition

See the general model for black shale in the Introduction.

Economic importance

The Turner Mine Shale is the immediate roof of many underground mines in the Springfield Coal. It is moderately competent and less sensitive to moisture than the Dykersburg Shale.

Remarks

References

  • Boardman, D.R., D.M. Work, R.H. Mapes, and J.E. Barrick, 1994, Biostratigraphy of Middle and Late Pennsylvanian (Desmoinesian-Virgilian) ammonoids: Kansas Geological Survey, Bulletin 232, 121 p.
  • Gentile, R.J., and T.L. Thompson, 2004, Paleozoic succession in Missouri, Part 5, Pennsylvanian Subsystem, Volume A, Morrowan strata through Cherokee Group: Missouri Geological Survey, Report of Investigations 70, 241 p. and correlation chart.
  • Heckel, P.H., 2013, Pennsylvanian stratigraphy of Northern Midcontinent Shelf and biostratigraphic correlation of cyclothems: Stratigraphy, v. 10, nos. 1–2, p. 3–39.
  • Nelson, W.J., 1983a, The Turner Mine Shale Member: A newly named stratigraphic unit of the Carbondale Formation, in R.J. Jacobson, ed., Geologic Notes: Illinois State Geological Survey, Circular 529, p. 11–12.
  • Peppers, R.A., 1996, Palynological correlation of major Pennsylvanian (Middle and Upper Carboniferous) chronostratigraphic boundaries in the Illinois and other coal basins: Geological Society of America, Memoir 188, 111 p. and correlation chart.
  • Savage, T.E., 1921, Geology and mineral resources of the Avon and Canton Quadrangles: Illinois State Geological Survey, Bulletin 38, p. 209–271, 1 pl., 1:62,500.
  • Wanless, H.R., 1957, Geology and mineral resources of the Beardstown, Glasford, Havana, and Vermont Quadrangles: Illinois State Geological Survey, Bulletin 82, 233 p.
  • Wanless, H.R., 1958, Pennsylvanian faunas of the Beardstown, Glasford, Havana, and Vermont Quadrangles: Illinois State Geological Survey, Report of Investigations 205, 59 p.
  • Willman, H.B., and J.N. Payne, 1942, Geology and mineral resources of the Marseilles, Ottawa, and Streator Quadrangles: Illinois State Geological Survey, Bulletin 66, 388 p., 29 pls.
  • Work, D.M., C.E. Mason, and R.H. Mapes, 2009, The Pennsylvanian ammonoid succession in the Appalachian basin: Kentucky Geological Survey, Series 12, Special Publication 10, p. 71–77.
  • Worthen, A.H., 1870, Geology and palaeontology: Geological Survey of Illinois, v. 4, 508 p., 31 pls.

ISGS Codes

Stratigraphic Code Geo Unit Designation
2770
--